Introduction of Good Seeding Machine

Introduction of Good Seeding Machine

Good seeding machine is a planting machine that uses crop seeds as the sowing object. Planters used for a certain type or crop are often named with the name of the crop type, such as grain drills, corn drills, cotton seeders, forage spreaders, etc.

Planters plant seeds of crops or coated seeds made into pellets. It can be divided into three categories according to the sowing method: vacuum seed seeder spreader, drill seeder and hole seeder. Various types of precision seeders, which have been developed in large numbers since the 1950s, can precisely control the seeding rate, hole (plant) spacing and sowing depth. The pneumatic seed metering precision seeder developed in the 1970s, its seed metering device (air suction, air pressure or air blowing) uses positive or negative pressure airflow to discharge a row of seeds at certain intervals to achieve single-grain precision seeding, and Compared with the traditional mechanical seed metering device, it has the characteristics of accurate sowing and no damage to the seeds.

(1) Before the planter works, oil should be injected into each oil injection point in time to ensure that the running parts are fully lubricated. Lost or damaged parts should be replenished, replaced and repaired in time. Be careful not to apply oil to the gears and chains, so as not to stick to the mud and increase the wear and tear.
(2) The working length of each seeding wheel is equal, and the displacement is the same. The sowing amount adjustment mechanism is flexible, and there should be no sliding and empty movement.
(3) Disc opener The disc rotates flexibly, must not shake, and does not rub against the opener body.
(4) Before and after each shift and during work, the soil of each part should be cleaned, and special attention should be paid to removing the soil and oil on the transmission system.